Attachments
Showing 41–55 of 55 results
-
Attachments, Bobcat
BRUSH SAW
Applications
Forestry
Agriculture
LandscapingMain features
High-torque, low-speed motor increases efficiency while decreasing stalling
Manual 3-position boom angle
Left side discharge
Steel deflector shields protect operator and loader from flying debris
Cut slightly below ground level to minimize stumps
It has the ability to cut beyond mounting frame of saw when angled to leftSKU: n/a -
Attachments, Bobcat
CUTTER CRUSHER
Applications
Construction and Demolition
Road work, Recycling and CleaningMain features
Crushes concrete
Cuts rounds steel, rebar, wire, mesh, angle iron & I-beams.
Low noise output.
Minimal vibration
360° free rotation.
Mounts on Bobcat loaders & excavators.
Reversible cutting blades.
Works where other tools would be restricted.
X-change™ mount standard.SKU: n/a -
Attachments, Bobcat
DIGGER
Applications
Agriculture
Forestry
LandscapingMain features
Variable-speed displacement motor allows the flail cutter to be “tuned in” to your machine, depending on its hydraulic capacity. By varying the motor displacement to accept auxiliary hydraulic flows ranging from 64 to 151 l/min, the flail cutter can be operated on many different carriers.
Floating linkage is standard on the flail cutter. This, along with the attachment’s compact deck length, lets the unit follow the contour of the land regardless of the pitch or attitude of the carrier, permitting the cutter up to ten degrees of oscillation.
Safety compliance The flail cutter complies with the SAE J1001 standard for industrial flail mowers. It is standard-equipped with an automatic shut-off device which allows approximately ten inches of vertical travel in the Bob-Tach™; mounting system before the flail cutter shuts down.
Full-width tapered rear roller provides greater turning ability during operation.
Adjustable rear hatch allows operators to vary the size of discharged material, ranging from small, for mulching applications to coarse for high-performance cutting.SKU: n/a -
Attachments, Bobcat
FLAIL CUTTER
Main features
Variable-speed displacement motor allows the flail cutter to be “tuned in” to your machine, depending on its hydraulic capacity. By varying the motor displacement to accept auxiliary hydraulic flows ranging from 64 to 151 l/min, the flail cutter can be operated on many different carriers.
Floating linkage is standard on the flail cutter. This, along with the attachment’s compact deck length, lets the unit follow the contour of the land regardless of the pitch or attitude of the carrier, permitting the cutter up to ten degrees of oscillation.
Safety compliance The flail cutter complies with the SAE J1001 standard for industrial flail mowers. It is standard-equipped with an automatic shut-off device which allows approximately ten inches of vertical travel in the Bob-Tach™; mounting system before the flail cutter shuts down.
Full-width tapered rear roller provides greater turning ability during operation.
Adjustable rear hatch allows operators to vary the size of discharged material, ranging from small, for mulching applications to coarse for high-performance cutting.SKU: n/a -
Attachments, Bobcat
FORESTRY CUTTER
Applications
Agriculture
Forestry
LandscapingMain features
Variable-speed displacement motor allows the flail cutter to be “tuned in” to your machine, depending on its hydraulic capacity. By varying the motor displacement to accept auxiliary hydraulic flows ranging from 64 to 151 l/min, the flail cutter can be operated on many different carriers.
Floating linkage is standard on the flail cutter. This, along with the attachment’s compact deck length, lets the unit follow the contour of the land regardless of the pitch or attitude of the carrier, permitting the cutter up to ten degrees of oscillation.
Safety compliance The flail cutter complies with the SAE J1001 standard for industrial flail mowers. It is standard-equipped with an automatic shut-off device which allows approximately ten inches of vertical travel in the Bob-Tach™; mounting system before the flail cutter shuts down.
Full-width tapered rear roller provides greater turning ability during operation.
Adjustable rear hatch allows operators to vary the size of discharged material, ranging from small, for mulching applications to coarse for high-performance cutting.SKU: n/a -
Attachments, Bobcat
INDUSTRIAL GRAPPLE FORK
Applications
Agriculture
Construction and Demolition
Landscaping
Lifting and Handling
Road work, Recycling and CleaningMain features
Move hard to handle materials easily.
Hydraulically controlled grapple is easy to operate.
Exclusive Bob-Tach™ mounting system lets you change to another attachment quickly.
Handles bulky, uneven loads securely.SKU: n/a -
Attachments, Bobcat
MOWER
Applications
Agriculture
Forestry
LandscapingMain features
Three partially overlapping blades for clean cutting with no skips.
Direct hydraulic motor drive.
Industry standard cutting blades elevate grass for better mulching capability.
Adjustable cutting height from 57 to 140 mm in 13 mm increments.
Unique attachment frame allows mower to oscillate independently of loader.
Rear discharge disperses grass clippings under the carrier, away from buildings, trees and fences.
Patented blade shutoff device stops blade rotation when mower is raised off the ground.
Anti-scalping wheel allows operator to traverse uneven terrain without scalping the surface.SKU: n/a -
Attachments, Bobcat
PLATE COMPACTOR
Applications
Construction and Demolition
Landscaping
Road work, Recycling and CleaningMain features
4 outboard shock mounts : 1) Distribute vibration evenly 2) Helps keep compactor level 3) Increases stability 4) Improves compaction efficiency, extends component life
Better compaction than hand-held compactors.
Operator comfort better vs. hand-held models.
Compact hard to reach ares – trenches/slopes.SKU: n/a -
Attachments, Bobcat
SILT FENCE INSTALLER
Applications
Agriculture
Forestry
LandscapingMain features
Increase your productivity by installing hundreds of meters of silt fence fabric per hour and avoid costly governmental fines and project shutdowns.
It’s the fastest, easiest and most economical way to install silt fence for residential, commercial, industrial or motorway projects.
The silt fence installer works with 91 cm, 107 cm or 122 cm silt fence.
Minor modifications are required to adjust the roll holder for a different size.SKU: n/a -
Attachments, Bobcat
STUMP GRINDER
Applications
Agriculture
Forestry
LandscapingMain features
The work group is mounted at an angle of 90 degrees to the operator for excellent visibility to the cutting area, giving the operator the same wide view as a pull-behind stump grinder.
The swing cylinder design generates an impressive arc. This allows the operator to cut large stumps without repositioning.
Rubber deflector shields and screening provide additional operator comfort and protection from wood chips.
The unique valve design controls the swing circuit speed to prevent the cutting wheel from stalling in the cut.
Diverse cutting heights gives better access for a variety of size stumps.SKU: n/a -
Attachments, Bobcat
TILT-TATCH™
Applications
Agriculture
Forestry
LandscapingMain features
All-electric control from operator’s seat
Overlapping blades for clean cut
Swing-open gate with open frame design for easy tree access
Enclosed tower cylinders and hoses
Adjustable legs with four digging sizes
Adjustable slides (non-greasing, no rust)
Easy-entry steps
Leveling lightSKU: n/a -
Attachments, Bobcat
TREE TRANSPLANTER
Applications
Agriculture
Forestry
LandscapingMain features
All-electric control from operator’s seat
Overlapping blades for clean cut
Swing-open gate with open frame design for easy tree access
Enclosed tower cylinders and hoses
Adjustable legs with four digging sizes
Adjustable slides (non-greasing, no rust)
Easy-entry steps
Leveling lightSKU: n/a -
Attachments, Bobcat
HYDRAULIC COUPLER
Applications
Agriculture
Construction and Demolition
Landscaping
Road work, Recycling and CleaningMain features
Designed and built specifically for Bobcat® loaders.
Hydraulic side shift capability to trench close to buildings, fences or other objects. Get even closer by removing the auger.
Changing to a trencher attachment is quick and easy with the Bob-Tach™ mounting system.SKU: n/a -
Attachments, Bobcat
TRENCHER EXCAVATORS
Applications
Agriculture
Construction and Demolition
Landscaping
Road work, Recycling and CleaningMain features
Designed and built specifically for Bobcat® loaders.
Hydraulic side shift capability to trench close to buildings, fences or other objects. Get even closer by removing the auger.
Changing to a trencher attachment is quick and easy with the Bob-Tach™ mounting system.SKU: n/a
Showing 41–55 of 55 results